|
|
STICKY:
how to install springs
(Preview)
http://www.mustangworld.com/ourpics/fcar/spring1....
|
uatlb
|
0
|
2382
|
|
|
|
|
ball joint install?
(closed)
(Preview)
Need to replace lower ball joints on my car, brake shop wanted way toomuch for it. I can do it myself bit don't have time this week before I drive to virginia thursday. Anybody want to make some money on the side? Pm me
|
yuke174
|
5
|
4460
|
|
|
|
|
DMC is now a ProCharger and Mickey Thompson dealer!
(Preview)
If there's anything at all we can do to help you out, please call and ask for me.
|
DMC Jason
|
0
|
1936
|
|
|
|
|
|
Alignment specs
(Preview)
I want to get my 84 aligned on a new computerized machine. Does anyone have any good specs for a coilover upr racked fox. I'm running sn95 spindles with 18x9 rims. I do have it dropped down a bit but not in the weeds. Thanks-
|
Mcnally351
|
2
|
2081
|
|
|
|
|
|
PA Racing K Member?
(Preview)
Looking into the PA Racing K Member kit. Wanted to know if anyone's running one or if they've heard any feedback
|
90LX
|
3
|
2809
|
|
|
|
|
|
TORQUE BOX KIT
(Preview)
[url=http://www.mustangsunlimited.com/itemdy01.asp?T1=TB2016KIT+01&Category=Suspension+%26+Steering&subCategory=Torque+Box%2FLink&CatKey=74...
|
wheels
|
4
|
3673
|
|
|
|
|
|
Turbo tbird rear
(Preview)
Are the turbo third rears the same as the mark vii rear ends? 7.5-8.8? Gears
Thanks-
|
Mcnally351
|
5
|
2528
|
|
|
|
|
|
stock rear coil springs
(Preview)
so i have put 3 different pairs of stock coils in the back of my car and its ass still sags way down.....starting to get really pist off at this thing.....any ideas???
thanks
Stags
|
Stags89stang
|
4
|
2114
|
|
|
|
|
|
need a part number
(Preview)
I have a pair of rear upper control arms that need new brushing. I was wondering if anyone could hive me a part number for them and the brushing in the axle itself. Thanks
|
luke
|
2
|
1990
|
|
|
|
|
|
sn-95 spindles
(Preview)
sn-95 spindles, I am doing the swap, do I use 96-04 ball joints? I am running a upr k-member/a-arms/coilover set up. thanks
|
Mcnally351
|
8
|
2143
|
|
|
|
|
|
coil overs or coil springs
(Preview)
What do you guys think i should get?
|
notchdan
|
6
|
2377
|
|
|
|
|
|
need help with dd k member
(Preview)
so i put a different set of tires on my car and now they rub and they shouldnt. now if my dd k member moved my wheelbase forward what can i do to resolve this so i get no rubbing
|
loopy
|
17
|
3037
|
|
|
|
|
|
Can I lower my fox
(Preview)
I have a 88 fox on 17in cobra r wheels and I was wondering if I could lower it a 1in I was wondering if anyone knows if it would rub
|
88mustangt
|
8
|
2388
|
|
|
|
|
|
Heated rear springs
(Preview)
Anyone ever heated springs in fox body in the rear just wondering friend gave me front springs and want to lower just a little in the rear not to much cause I'm gonna b running a drag radial
|
Eightyfivefox
|
12
|
2162
|
|
|
|
|
|
strange or lakewoods?
(Preview)
gonna buy shocks and struts soon...gonna be a minitubbed street car running coilovers etc... is it a good idea to run strange in the front and lakewoods in the rear? or should i run one of the two brands all way around if so which brand of choice...for street use and drag racing ? all help appriciated
|
91notchback
|
0
|
1975
|
|
|
|
|
|
? About tubular k member
(Preview)
Thinking of buying qa1 tubular k can u drive this on the street? I drive my car daily will this effect comfortability? Will it b safe? Or do I have to avoid stuff like pot holes
and bumps all that ?
|
Eightyfivefox
|
11
|
2336
|
|
|
|
|
|
D&D K-Member/Spring Help!?
(Preview)
I recently purchased a D&D K-Member Kit secondhand from a guy who never ended up installing it. He sold me the complete kit less springs. I'm having a hard time finding out the spring height/specs that will work for the coilover kit. The car is a street/strip vehicle (not a daily driver) and has a 39...
|
90LX
|
3
|
2293
|
|
|
|
|
|
Fox lowering spring help
(Preview)
ok so i have eibach blue springs. im assuming they are the drag launch cuz of the color. i dont really go to the track all that often and want something different. these springs ride like crap and give my car a reverse rake.. the front wheel gap is larger than the rear.
i want the ride to be smoother and hav...
|
nacanitihs
|
0
|
1738
|
|
|
|
|
|
spring rate???
(Preview)
hey guys im building up my notch and i figure id give some info and see if i can get some help....i wanna send this car into the nines as a street car on nitrous im doing a sbf, aod and a 9in with 4:30 rear gears heres my question i have a tubular front end by aje that uses a motor plate and coilovers my question is...
|
91notchback
|
0
|
1995
|
|
|
|
|
|
WTT my lowering springs for stock height 5.0 springs...
(Preview)
alright, I love the look and stance of my car being lowered, but i want to raise it up to stock 5.0 ride height as this is my daily driver. Anyone want to trade springs with me straight up? I'm looking for stock height springs whether they are factory or aftermarket. Heres a pic.... [IMG]https://i303.ph...
|
boostd710
|
10
|
4861
|
|
|
|
|
|
ride height
(Preview)
my car needs to get dropped, but theres one problem, i guess while in school one of my springs were cracked so my dad went out and ordered new rear springs at factory height. but would it be stupid to just get spring right now to drop the front cause,IMO the front sits way to high, or should i just wait till th...
|
howie8124
|
21
|
3502
|
|
|
|
|
|
whats better trickflow rear springs or stock w/ airbag
(Preview)
Hey everyone,
I'm curious to know if anyone has the trickflow rear springs in there stang. I was talking to a guy at Epping who had them and said he drives on the street with them. I dunno?? Does the airbag work good? I will be running Street slicks. Any suggests would be appreciated? Thanks
|
den83stng
|
6
|
3177
|
|
|
|
|
|
what type of springs to get??
(Preview)
If i go with 18s im gonna wanna lower it to not be a 4x4 but im not looking to slam it...what do you guys recommend maybe h&r ss, eibach, steeda.... let me know also i was reading about the eibachs said you wouldnt need new CC plates but should i get them anyways?
|
howie8124
|
11
|
2600
|
|
|
|
|
|
86 v6 3.8L Mustang Springs
(Preview)
I am getting an 86 V6 Mustang and converting my v8 5.0L motor to it, rear end etc.. but the springs on my v8 mustang which is an 88 suck as in there junk.. so was wondering when I do the motor swap If I can use the springs from the v6 with my v8 motor? Thanks again... and yes I will use the v8 spindles and brakes, bu...
|
mustang50lx88
|
4
|
2096
|
|
|
|
|
|
v8 spindals
(Preview)
just to make sure are v8 spindals the same as 4 cylinder ones if not whats different?
|
91notchback
|
2
|
2351
|
|
|
|
|
|
which is the best???
(Preview)
which is the best tubular k member and a arm kit to run on a mostly street car but with alot of strip time? im gonna run coilovers if that makes any difference.
|
91notchback
|
6
|
2363
|
|
|
|
|
|
drop spindles?????
(closed)
(Preview)
should i use drop spindles for a street/strip mustang or should i use stock ones?
|
91notchback
|
2
|
2438
|
|
|
|
|
|
new shocks and struts
(Preview)
My cars taking bumps like its gonna be its last, so i can tell the front struts are almost gone so im gonna end up doing it all around...any ideas of what to get for shocks and struts.
|
howie8124
|
7
|
2345
|
|
|
|
|
|
anyone know who can do through floor subframe connectors
(Preview)
how to do them so my bro can weld them in is there any giudlines or what ?
|
5pointslow
|
9
|
2315
|
|
|
|
|
|
Suspension Q's
(Preview)
I am looking into replacing the shocks/struts front and rear.. What is the best bang for the buck, but has great overall quality? I know the rule of thumb is "If you want quality, You gotta pay for it!" Thanks guys and gals for the input. I greatly appreciate it.
|
mustang50lx88
|
14
|
2807
|
|
|
|
|
|
shock struts and springs
(Preview)
well its time for new stuff for 04 gt
going with mm cc plates
what shock struts and springs do u like and hate
and where u get them and for how much!!!
|
wheels
|
2
|
2101
|
|
|
|
|
|
quad shocks?
(Preview)
so i am going to have to replace my rear shock real soon
what should i do with the quad shocks keep them o run with out them
and what could happen it i dont run them
|
bleed blue
|
3
|
2355
|
|
|
|
|
|
Vibration on decel
(Preview)
I think it's a U-Joint, but I want more opinions before I go ripping it apart. When I am on the highway, it has a slight vibration, but when I decel, you can really feel it. Then when I get back on the gas, it 'clunks' a bit, not audible, but I can feel the 'bump'. This is in the Explorer, AWD.
|
89Rustang
|
3
|
1846
|
|
|
|
|
|
AJE K MEMBER, ANY GOOD?
(Preview)
Anyone heard anything about Anthony Jones Enterprises? Ive never heard of em till i decided to do this whole sbc mustang deal...Im gonna buy the k member for the swap...just wondering if anyone heard bad things about em
|
Big Frank
|
1
|
1920
|
|
|
|
|
|
need opinion
(Preview)
i need c/c plates and shocks and struts
also want tierods
whats ur opinions
|
wheels
|
2
|
1974
|
|
|
|
|
|
Pics of QA1 K-member installed?
(Preview)
Does anyone have any pics of this installed? I just installed mine and I'm getting a rub on the front passengers side wheel... Also looking to see if the coil overs will re-center the wheel in the wheel well.
|
Turbo89
|
8
|
2382
|
|
|
|
|
|
Wheel Bearings
(Preview)
I have an 88 Mustang 5.0 and I'm in need of replacing my front wheel bearings, I know where there located but have never done this kind of job before, and was wondering if anyone has experience with doing them, and could give me some info on the subject, such as, what tools are required and what steps I shou...
|
mustang50lx88
|
8
|
2161
|
|
|
|
|
|
QA1 K-member
(Preview)
Anyone using one of these on a fox body? I've heard about the 1/2" of forward movement on the front tires; is there any truth to this? Also, has anyone had any issues installing these?
Discuss.
|
Turbo89
|
1
|
1992
|
|
|
|
|
|
What springs?
(Preview)
So.... i have a dilemna, the GT is being turned into a daily driver car since the Cobra is under the knife already and the GT has the eibach pro kit springs with the iso's, and ive been looking at the H&R SS's and their race springs, they both have a nice drop... but are the race springs all that differ fr...
|
9T9MnyPit
|
4
|
2286
|
|
|
|
|
|
tubular k member
(Preview)
anyone here run a tubular k member?? im thinkin about going that route but not sure yet.....how do you like it?
|
supertukes
|
9
|
2415
|
|
|
|
|
|
Installing front springs
(Preview)
Alright I am going to be installing new front lowering springs when my mm camber plates arrive within the next few days and was wondering if anyone had any pointers on removal and installation as I don't feel like killing myself. From what I have read I should be able to undo the strut and caliper and lowe...
|
94bronco
|
2
|
2090
|
|
|
