BOSTONSTANGS.COM

stangcrazy · stangcrazy

Bought a 1985 mustang lx notch today started as a roller for 600 ended up with 3 motors 1 5 speed 1 auto and a car full of parts for only 1000. frome is solid as can be body needs a lil love (drivers door is a little rough and the lower door piller needs a lil help but everything else is solid) Came with full exhau...

droptopfox · droptopfox

i wana do 5 lug on my car cheap as possable will sn95 spindles bolt right up no issues and witch side ranger axle it the correct length my buddy has a junk yard so it will be almost free but i dont want to waste my time removing parts if they wont work

droptopfox · droptopfox

okay i want a manula rack to save me money i looked they offered manual racks in early 80s and 79 4 cylinder cars but 79-81 and 82-85 there different part numbers anyone know witch one will work in my car or what ill need to swap them in

FoxBodyFan · FoxBodyFan

Hey everyone. I havent been on here for a while so please excuse me if this post is in the wrong place. I have a 1987 Mustang LX hatch back. 5.0, 5 speed. I love this car but she has her problems. This is where I need a little help. None of my gauges work besides the tach. I replaced the cluster and it does the sam...

92lxnotchjs · 92lxnotchjs

I need to do a patch panel replacement on my 92 notch and i am aware that the fender wheel openings are slightly larger on 90-93 cars is the same true for the quarter panel openings or can i use any 79-93 lower quarter patch panels to do the repair

NairUrSelf · NairUrSelf

I had a 93 saleen replica. It was white with silver saleen graphics with shaved door handles smoked tail lights and a 3 inch cowl induction hood. It also had a custom marble look dash on it. I sold it a few years back but I'm pretty sure I saw it a while back in brockton on 24 I think whoever had it must have hit s...

9greeNotch3 · 9greeNotch3

[IMG]https://i163.photobucket.com/albums/t315/9greeNotch3/The%20Pa...

PittBull · PittBull

Well the notch is up and running. It has a stock motor and no blower but it runs and drives. After hours of labor, thousands of dollars, endless fighting and months of not having a car, it is over. I am sad that this all happened the way it did. I took a huge hit and so did Josh. I want to thank Ed, Josh, Sled, 88 h...

varney61 · varney61

Hey everyone and anyone, i have a 92 foxbody gt, 5.0 5-speed. i just put a new alternator and a couple new electrical pieces in my car.. my check engine and check oil have always flashed on aand off while i drive, now they aare ALWAAYS on.. i have plenty of oil, anyone have any advice???

1979slowstang · 1979slowstang

How do you guys with 4 hood pins mount the back ones? Pics would be helpful.

FOXGT93 · FOXGT93

I'm having a hard time finding a place to get diags for my 93GT. Everyone tells me only 96+.. If I'm not mistaken it's a OBG 1? This light is so annoying.. Anywhere in the NS area?

90stangGT · 90stangGT

Heys guys. Im back in a 5.0. I sold my dakota r/t to get some other things taken care of aswell get another stang. The car has 173,800 miles. Motor rebuilt 17,000 miles ago and it has a new tremec 5-speed. Rear end was rebuilt with 3.73's all about the same time. Other mods are in my sig. I havent even got to cl...

90LX · 90LX

Doing a 392 swap in a fox and looking for some advice on headers. Should I buy a 351 swap specific header setup or should I have a set custom made? I'm looking for guaranteed fit and good performance

mjstang18 · mjstang18

hey guys. so i just got my stang back today after having a new engine and clutch put in. was expecting everything to be running good but turns out its running real rough. the biggest problem is the clutch.. when i have it in neutral and let the clutch up it will stall was wondering if maybe it just needs to be...

adryen oliveira · adryen oliveira

i need to change my heads on my 87 gt any one knows how much is the labor? Any one wiling to do it?

droptopfox · droptopfox

droptopfox · droptopfox

im doing a 347 i was thinking of doing a set in my 85 any advice

9greeNotch3 · 9greeNotch3

JordanDiD24 · JordanDiD24

So, for shits and giggles i put my car up on craigslist to see what i could get. I got an email from this guy from Salem who wants to trade, heres what his car is. Its an 86 gt with ttops, 89 engine Jasper short block ported E7 heads, trick flow stage one cam, lifters and springs. Edelbrock intake and c...

droptopfox · droptopfox

i just built a 306 with edelbrock heads 24lb injectors with the correct mass air 75mm tb big cam hi6 box fireball coil egr delete etc........ sometimes whenits hot after driving it but not always it starts hard even didnt start ionce pulled the plug and they were wet i changed thaem and started up no prob...

droptopfox · droptopfox

http://boston.craigslist.org/sob/cto/1113775954.html

Fitzy · Fitzy

I got a racing clutch put in a few months ago and it was impossible to engage because the morons didn't know what the hell they were doing, so I had em put a stock one back in and it is still ridiculous...I'm down in Tampa,FL now and just driving up the street my leg gets sore, there's no way I can drive it back h...

9greeNotch3 · 9greeNotch3

[IMG]https://i163.photobucket.com/albums/t315/9greeNotch3/other%20car...

fliggnewton · fliggnewton

:??:So I recently bought a 1988 GT/COBRA clone and it has all the goodies I wanted but there is one problem that bugs me and I can't, for the life of me figure it out...when the car is idling, there is like this shreek/howl that comes from the holley systemax upper manifold, and if I put my hand on top of the m...

fitz101 · fitz101

i know this was on the site awhile ago, just cant find it. what im looking for is the info on the engine bay side walls. Where the battery and the windsheild wiper fluid container are in the engine bay, they make preformed sheets of metal that smooth out the interior. Make sense? I just want to clean up the b...

joeydoubleu · joeydoubleu

here they are.

Topic		Started By	Replies	Views	Last Post
	bought a 85 notch today!! (Preview) Bought a 1985 mustang lx notch today started as a roller for 600 ended up with 3 motors 1 5 speed 1 auto and a car full of parts for only 1000. frome is solid as can be body needs a lil love (drivers door is a little rough and the lower door piller needs a lil help but everything else is solid) Came with full exhau...	stangcrazy	21	6765	Jan 28, 2012 by BigHenault
	5 lug question (Preview) i wana do 5 lug on my car cheap as possable will sn95 spindles bolt right up no issues and witch side ranger axle it the correct length my buddy has a junk yard so it will be almost free but i dont want to waste my time removing parts if they wont work	droptopfox	7	2411	Aug 16, 2011 by droptopfox
	steering rack question (Preview) okay i want a manula rack to save me money i looked they offered manual racks in early 80s and 79 4 cylinder cars but 79-81 and 82-85 there different part numbers anyone know witch one will work in my car or what ill need to swap them in	droptopfox	0	1791	Aug 6, 2011 by droptopfox
	Help (Preview) Hey everyone. I havent been on here for a while so please excuse me if this post is in the wrong place. I have a 1987 Mustang LX hatch back. 5.0, 5 speed. I love this car but she has her problems. This is where I need a little help. None of my gauges work besides the tach. I replaced the cluster and it does the sam...	FoxBodyFan	15	2846	May 24, 2011 by FoxBodyFan
	fox body wheel openings (Preview) I need to do a patch panel replacement on my 92 notch and i am aware that the fender wheel openings are slightly larger on 90-93 cars is the same true for the quarter panel openings or can i use any 79-93 lower quarter patch panels to do the repair	92lxnotchjs	0	2319	Apr 11, 2011 by 92lxnotchjs
	Trying to track down my old 93 ultra white saleen replica.... (Preview) I had a 93 saleen replica. It was white with silver saleen graphics with shaved door handles smoked tail lights and a 3 inch cowl induction hood. It also had a custom marble look dash on it. I sold it a few years back but I'm pretty sure I saw it a while back in brockton on 24 I think whoever had it must have hit s...	NairUrSelf	4	2360	Feb 20, 2011 by Eightyfivefox
	Pics of your hatchback (Preview) [IMG]https://i163.photobucket.com/albums/t315/9greeNotch3/The%20Pa...	9greeNotch3	18	4498	Oct 7, 2010 by 93 LX FiveO
	It lives, it finally lives! (I got f****ed today closure) (Preview) Well the notch is up and running. It has a stock motor and no blower but it runs and drives. After hours of labor, thousands of dollars, endless fighting and months of not having a car, it is over. I am sad that this all happened the way it did. I took a huge hit and so did Josh. I want to thank Ed, Josh, Sled, 88 h...	PittBull	10	3040	Jun 30, 2010 by nickstang87
	Check engine and check oil..?? (Preview) Hey everyone and anyone, i have a 92 foxbody gt, 5.0 5-speed. i just put a new alternator and a couple new electrical pieces in my car.. my check engine and check oil have always flashed on aand off while i drive, now they aare ALWAAYS on.. i have plenty of oil, anyone have any advice???	varney61	10	2600	May 13, 2010 by varney61
	Hood pins (Preview) How do you guys with 4 hood pins mount the back ones? Pics would be helpful.	1979slowstang	2	2406	Apr 26, 2010 by skunk
	Check engine, where to go.. (93 gt) (Preview) I'm having a hard time finding a place to get diags for my 93GT. Everyone tells me only 96+.. If I'm not mistaken it's a OBG 1? This light is so annoying.. Anywhere in the NS area?	FOXGT93	6	2759	Apr 14, 2010 by Mustang5L5
	My 1990 Mustang GT (56K dont dare) (Preview) Heys guys. Im back in a 5.0. I sold my dakota r/t to get some other things taken care of aswell get another stang. The car has 173,800 miles. Motor rebuilt 17,000 miles ago and it has a new tremec 5-speed. Rear end was rebuilt with 3.73's all about the same time. Other mods are in my sig. I havent even got to cl...	90stangGT	26	4658	Mar 31, 2010 by 90stangGT
	Header Help (Preview) Doing a 392 swap in a fox and looking for some advice on headers. Should I buy a 351 swap specific header setup or should I have a set custom made? I'm looking for guaranteed fit and good performance	90LX	4	2200	Mar 30, 2010 by Green92LX
	problems after engine swap (Preview) hey guys. so i just got my stang back today after having a new engine and clutch put in. was expecting everything to be running good but turns out its running real rough. the biggest problem is the clutch.. when i have it in neutral and let the clutch up it will stall was wondering if maybe it just needs to be...	mjstang18	9	2969	Mar 23, 2010 by Mcnally351
	heads (Preview) i need to change my heads on my 87 gt any one knows how much is the labor? Any one wiling to do it?	adryen oliveira	2	2409	Mar 8, 2010 by jgt8229
	anyone know this car (Preview)	droptopfox	7	2984	Dec 14, 2009 by sean86gt
	solid motor mounts yes or no (Preview) im doing a 347 i was thinking of doing a set in my 85 any advice	droptopfox	13	3197	Nov 27, 2009 by snakebite
	Pics of your Notchback (Preview)	9greeNotch3	33	5635	Nov 14, 2009 by sean86gt
	How does this sound for a trade? Advice! (Preview) So, for shits and giggles i put my car up on craigslist to see what i could get. I got an email from this guy from Salem who wants to trade, heres what his car is. Its an 86 gt with ttops, 89 engine Jasper short block ported E7 heads, trick flow stage one cam, lifters and springs. Edelbrock intake and c...	JordanDiD24	18	4118	Oct 6, 2009 by droptopfox
	starting problems (Preview) i just built a 306 with edelbrock heads 24lb injectors with the correct mass air 75mm tb big cam hi6 box fireball coil egr delete etc........ sometimes whenits hot after driving it but not always it starts hard even didnt start ionce pulled the plug and they were wet i changed thaem and started up no prob...	droptopfox	13	3195	Apr 26, 2009 by droptopfox
	does anyone know this car or has anyone looked at it (Preview) http://boston.craigslist.org/sob/cto/1113775954.html	droptopfox	3	2592	Apr 11, 2009 by BigHenault
	My Clutch is hard as a rock!! (Preview) I got a racing clutch put in a few months ago and it was impossible to engage because the morons didn't know what the hell they were doing, so I had em put a stock one back in and it is still ridiculous...I'm down in Tampa,FL now and just driving up the street my leg gets sore, there's no way I can drive it back h...	Fitzy	8	2758	Apr 8, 2009 by mustang50lx88
	Pics of your favorite Fox Body (Preview) [IMG]https://i163.photobucket.com/albums/t315/9greeNotch3/other%20car...	9greeNotch3	18	6788	Feb 11, 2009 by SPDoherty
	HOLLEY HOWL?? (Preview) :??:So I recently bought a 1988 GT/COBRA clone and it has all the goodies I wanted but there is one problem that bugs me and I can't, for the life of me figure it out...when the car is idling, there is like this shreek/howl that comes from the holley systemax upper manifold, and if I put my hand on top of the m...	fliggnewton	8	2913	Nov 29, 2008 by fliggnewton
	Looking for engine bay plating... (Preview) i know this was on the site awhile ago, just cant find it. what im looking for is the info on the engine bay side walls. Where the battery and the windsheild wiper fluid container are in the engine bay, they make preformed sheets of metal that smooth out the interior. Make sense? I just want to clean up the b...	fitz101	8	2677	Oct 13, 2008 by fitz101
	heres the new ones! (Preview) here they are.	joeydoubleu	5	3024	May 27, 2008 by 9greeNotch3
Page 1 of 1 sorted by